What giving of foot should I take for my sewing tool? I have a Kenmore sewing electrical device, model number 385-15208400, serial number...
I have a Kenmore sewing electrical device, model number 385-15208400, serial number 43154794. This is a vertical sewing machine, I believe...(when I sew, the cloth is fed this process | |.
In a recent move, the foot to this sewing machine fell stale (probably while being packed), and is in a minute missing. I am not sure what kind of foot I requirement to order as a replacement.
I usually use this sewing contraption to sew seams and hem for clothes, and...yea, that's about it. I engender lots of medieval garments with it, and if it make a difference, I commonly use cotton, linen, silk, satin, and brocade.
Anyone?
In sewing machine lingo, vertical and horizontal certainly refer to the placement of the bobbin, not the direction you feed the textile through.
It's cheaper to go into the store and proclaim the foot. Tell the salesperson whether you have a front-loading or top-loading bobbin and which foot you stipulation. They can look it up and order you one and own it shipped directly to your house. Shipping is free from the store, they'll charge you an arm and a leg on the web.
When it comes to what type of foot you stipulation, it sounds like you lost your straight stitch ("A") foot which does your straight stitching. Through the parts site it's #731806001 and costs $2.49 plus shipping. There's a universal-type straight stitch foot (#20/97736) available from the store for nearly $8 that ships for free.
HTH!
You'll find your foot at Sears Parts Direct: http://www.searspartsdirect.com
Enter your model number, and you'll be capable of order a replacement. I did this for an mature sewing machine that have been LONG out of production. A few minutes on the net, $8, and postage, and I was within business!
Answers: Chances are that your Kenmore is really a Janome in disguise, fwiw, if it's lawfully recent. Most machines can use the right style of generic feet, but you stipulation to know if you've got a snap on, low or lofty shank machine. See: https://www.nancysnotions.com/NNVia/Cust...
However, most machines do best next to their own manufacturer's feet, so first, I'd send you to a store next to Janome machines or to Sears for Kenmore.
Your machine without a doubt came next to a zigzag foot, commonly called an "adjectives purpose foot". To that, I would add a zipper foot (also adjectives for cording) and an edgestitch foot, as well as a foot that allows your domestic device to make buttonholes (which may also be an embroidery foot). It's amazing how much more effortlessly some of the specialty feet tolerate you do basic sewing tasks compared to the all-purpose foot.
If this is an older sewing domestic device, I would suggest you call a sewing apparatus repair place. They may have extra trimmings for several other brands. If your machine is not too unwieldy, take it next to you so you can maybe try them on for size! A domestic device dealer is not necessarily going to own a foot that will fit your machine, unless that is to say a brand they sell. Although I enjoy found some of the lower priced machines, no matter what brand it is, appear to have equal accessories. Yes, some are made by alike factories and consequently have different brand name put on them!
As for which foot you need, most machines use a utitlty stitch foot which have a smooth bottom. If you do satin stitching, be sure you get one that have an open gutter under the foot so the build up of stitches have somewhere to go. Hems, if you are doing a blind hem, afterwards you need a special foot that will comfort stitch the fold correctly. Most sewing machine dealer and repair places should be able to minister to you choose the right foot.
Good Luck!