What should I do more or less my door? Well my door won't close all the way shut, you explosion it...
Well my door won't close all the way shut, you explosion it some times and it won't do it. It is a regular brown wood door. The knob is gold. I also don't have a lock to it, same next to closet door. My dad is going to call the guy who installed it, but will he add a lock to? He added a lock to the bathroom door which is equal door design.
The one that installed it will come and trim the edge of the door so that it will not rub and close right. He should of done this the first time. You use a tool call a plane to do this or a chisel on the end near the hinge. Unless requested you do not get locks on bedroom doors. Just usually the bathroom. easy to shift out though.
rd
Did it close correctly upon installation? If so it probably wants to be sealed or painted to help stablize the door from humidity.
If it did`nt, the guy should enjoy stayed at it till the door worked properly.
You hardware can easily be changed from "passage" to "bed and bath". (the color is totally irrelavent to the operation)
With an avatar like yours its tricky to take you seriously I fail to deduce what you are asking. Get a new door maybe?
lets the door opening for when icam in the blink of an eye to ** you baby It could be that the hinges want tightening, or it is possible that the house has FOUNDATION problems .
Answers: See where the door is touching the door jamb. It is usually on the lock side, sometimes at top. You will see worn paint or stain.
It needs to be planed down at a particularly slight angle towards the
door stop. Do this When lock is out and before new one is installed. Only IF the Binding is Near the lock.
Remember, humidity cause's door to swell a moment or two. You should
have a Maximum 1/8'' gap between the door & jamb. and minimum 1/16'' when it's humid.
urm what r u trying to ask u already told us u call the guy who instaled it
there isnt anything more we can say