Washing Machine leak marine from underneath at the motor where on earth it go into the drum.? GE Washer Model # WHRE5260E1WW .The water leak from the drum...
GE Washer Model # WHRE5260E1WW .The water leak from the drum where the motor go in. I own to vacuum out the water roughly every five loads. Is there some sort of stamp that needs replaced? It is solitary 2 years old, should own purchased the extended warranty! Thanks
There is a rubber boot between the tub and the drive system that may enjoy a hole in it. Also one of the steep hoses may be leaking. The solitary way to know is to bring it apart and look.
I would guess the hose from the pump to the tub is not on properly from the factory or the hose clamp is just unpromising.
You can check this out yourself pretty easily by removing the front cover and running the apparatus while you watch it by removing the cover this will allow you to see adjectives operations.
To remove the cover adjectives you need is a putty axe or you can use a butter knife it is a moment ago a Little harder.
Insert the knife surrounded by between the front and top cover approximately 1.5" and 2" in from respectively side you will feel some resistance this is the latching spring only give the run through a sharp smack on the handle to force the wound in toward the stern this will release the front cover you will need to do this on both sides when the top is loose verbs out and up as the cover is hinged on two pins at the bottom..To replace the
cover when you are finished just put it pay for on the pegs at the bottom close it and smack the top corners to latch them.
Answers: Try going to http://www.repairclinic.com/0088_11_1.as...
and read about how to prefer where the ooze is occurring by when it occurs. They will facilitate you troubleshoot your washer.