Washing tool sometimes short circuits in one piece house. What to do? In my rented apartment there is a Candy CTT 66T wash...
In my rented apartment there is a Candy CTT 66T wash machine. Sometimes, when we use it, partially way through wash it short circuits the whole house and one of the switches on the circuit board go down and we can only put it up again after we unplug the wash machine.
I live surrounded by Spain and my landlord doesn't accord with any problems contained by our house so it is no use calling her.
Would changing the fuse to a bigger one assist?
Is it an electrical problem in the house?
Is it something inside the wash machine?
Sounds resembling you are trying to pull too much electrical current and its zapping the rest of the house cause a breaker to turn off. When you use the wash machine, don't use any other appliances at indistinguishable time. Hope this helps.
Sounds vastly much like a problem beside the washing electrical device,
check to see if it is any particular cycle when the fuse blows It could be when it go on to heating, and tries to draw more power. Try it on a cooler or even cold dust see if it is any different, you will see if it is the machine or not. Or plug the electrical device into a different socket, maybe the socket is flawed.
Unless you want to call contained by a professional try the simple things first
Answers: I agree, a 15A breaker contained by the breaker box is probably correct, if it is less later it probably should be changed. However the only road to reset the breaker is to unplug the washing contrivance, so I believe the problem is in the wash machine.
Sounds close to a replacement washing contrivance is required, do not mess about near any fuse ratings,, also its worth seeing if any other devices are running from the same circuit as the wash machine.
hope professional help and do not guess,,
not sure if this intertwine will help you
http://www.spanishpropertyco.com/Electri...
You don't say what size circuit breaker is surrounded by the fusebox, most washing machines will require a 15 amp breaker minimum on a spur supply or be connected to a 30 amp ring.
If the breaker is 15 amp or above DO NOT replace it next to anything bigger as you risk a fire.
Sounds like the apparatus is faulty, but have a little experience of Spanish electrics I would get it checked out professionally.