Troy bilt pressure washer won't start? u pull the gas powered cord and it wont even attempt to...

u pull the gas powered cord and it wont even attempt to strart
Answers:    Yea what RoeB said but check the oil it may be on low grease shut-down.
Remove spark plug, pour about 1/2 teaspoon of gas into hole, replace plug and pull cord, if it starts for a few second you know you do not have an ignition problem. I would then check the fuel float surrounded by carb. (if equipped) Remove fuel then the bolt holding the float bowl in place try moving the float up and down.
Clean the inside of bowl, place put a bet on on carb. And try starting again. If it will not you will probably have to rebuild carb..