Okay, I enjoy an Amana washer, model number, lwa90aw, it will not spin, merely whirr.? so how can i get it to agitate, is in that a...

so how can i get it to agitate, is in that a manual online that I can download? it have one belt that is visually apposite, no breaks. It is electronic.
Plumbing problems. My hip bath is stopped up....
Answers:    Here is an exploded line drawing of your washer model. I would start by checking the rigidity of the belt, because even though it may appear okay, it may not be tight enough. After that I would check the pulley to be sure that it's not seized. There are several other small parts within the transmission assembly that can progress bad, agitator pinion, etc. I hope this stripe drawing helps. http://www.apwagner.com/scripts/realtime...
Trying to remove a toilet specifically caulked really...
the nouns has 2 springs engender sure both are intact
look inside the pump for a small sock or anything that can cause it to lock up, if the belt is slick and glazed over after it is bad. If adjectives these are OK then the motor is most expected shot, a common problem next to these machines. I really like that site the other guy have posted. if you go to it on the disappeared side is a small screen scroll down to you find the windowpane with the motor pictured click on that and the good-for-nothing will be shown to the right of the motor. The idler pulley itself may necessitate oiling.