No power to Certain quantity of Junction Box? Theres this light contained by my house that just stopped working just...

Theres this light contained by my house that just stopped working just this minute.
I tested the light switches and they work. I go to the attic to get to the intersection box, and followed the right cable from the light to it.
Where the cable go in, theres no power. And adjectives the fuses are good.
Any philosophy?
Thanks.
-alex.
Can,t attain the blade rotten. it turns but...
Answers:    You said switches for a single light so you must enjoy a 3 or 4 way switch to the fixture. Those can be for a while tricky especially if you are using one of the voltage indicator pens to determine if it is hot.
If this is the baggage the best way to trouble shoot multiple switch circuits is to turn stale the power, unscrew the switches from the wall and determine the common terminal on respectively switch (requires multimeter). Disconnect the common front on all of them. You can presently use your meter to determine if one of the switches might be bad. You should hold continuity from common to one side and later flip the switch and you should have continuity from adjectives to the other side. Also if your comfortable doing it, turn the power on while you still have the switches apart and determine which cable is actually the nurture wire (it will be one of the commons) this will aid you surrounded by trouble shooting and in rewiring the multiswitch circuit if you establish to.
I hope this helps.
Where can I achieve the tool for Hunter...
Change the bulb, Sometimes bulbs are discouraging from the store, You wouldn't have power from the switch unless you complete the circuit. Flip the switch on and audition it at the light socket.