Need give a hand electrical system Ceiling Fan Wiring? How do I wire this ceiling fan? There are two house wires...
How do I wire this ceiling fan? There are two house wires coming from ceiling. One is white, and the other is black. There are three wires on the aficionado: One is white, one is black, and one red.
I understand that the ceiling white wire is Ground and that the ceiling black chain is hot. So, I hoped that the celing fan wires would be both hot; however, it seems close to the fan itself doesn't match colors next to housing standards. I can make the light come on but not the aficionado.
There is one light switch in the room that will be operating the fan/light (the aficionado has a light on it). I wired the white cable to the white wire, and the black wire to the black cable. I don't know what to wire the red wire to. Now just the light part of the enthusiast works, the fan does not work at all. Where does the red lead go? I need both the aficionado and the light to work.
PS:
The ceiling mount for the fan have a screw hold labeled "ground". I am not sure if I am supposed to use that screw hole at all, since I will be us
How old is the fan you are trying to install. Most newer fan have a white, black and Green. The white and black are your electrical and it doesnt matter how you cable those up and the the green in ground but I'm not sure about red, black and white. It sounds close to you may have received a fan wired for 220v. Red and black are other hot. Check the voltage on the fan motor before departure this hookup. Safety first.
Call the people who sold you the fan, and enjoy the model numbers when you call.
That red wire is the "hot" wire to your supporter that's part of your fixture. You need to place the black and red lead from the fixture to the black wire coming from the box in the ceiling.
If you own a green or bare copper wire coming from the box surrounded by the ceiling, wrap it clockwise around the screw labeled "ground".
Answers: Tie the red wire contained by with the black ones. It goes to the admirer. There's two wires so that you could have two switches to turn on each seperately.
Since you simply have one switch tie the black and red together, to the hot wire.
I would look closely at the electrics under the light. Possibly near are two neutral wires, spliced to the one running to the top. And a wire pulled out of this splice.
Also some fan have a capacitor tucked in near, which could be n/g. Or maybe the pull cuff speed switch, or reverse switch is n/g.
Since the fan and the feathery are two seperate circuits you need to power them both by connecting the red with the two black wires. White is adjectives not ground. Green or bare are ground wires. Since your house has elder wiring the third wire wishes to be wrapped around the screw ,it's your ground wire.