My dishwasher stopped letting sea contained by. i changed the inlet tap is here something else? I have a Kenmore dishwasher. It be working till now. ...

I have a Kenmore dishwasher. It be working till now. It only stop washing. I changed the inlet spout, but that was not the problem, it still does not work. it turns on and apears to count down on the minutes setting. you can hear the motor run but it's not getting sea.
Why does my toilet maintain getting plugged even...
Answers:    This may sound stupid, but mke sure you plugged the unsullied valve, and turned the hose down back on. Then win a volt meter and make sure you own power going to the water put your verbs on one line into the tap, and the other prob on a ground, if it was power and no wet is coming in, next you either own no water getting to the spigot, or you got a unpromising valve, I've see new valve be bad. If you don't enjoy power to it, then you enjoy either a doomed to failure control board or timer, which ever your model has.
How to fix a touch light (shorted)?
Could be a bent or pinched dampen line, or some sort of contaminant may be blocking the hose down line, especially if you enjoy a "saddle block" water smudge that attaches to an existing water queue to your sink.