I've get a hot tub sea heating system that the pilot frothy won't stay lit on. any suggestions outside of calling a proffesional to come and fix it, and charge me an exhorbitant...
proffesional to come and fix it, and charge me an exhorbitant amount? I've already checked the gas supply and it is on.
Mr Fred is spot on in his answer. Make sure the pilot is a strong blue flame and burning over the shutting down of the thermocouple, not a lazy washed out flame just scarcely touching it. The only difference may be if it is a Thermal Generator instead of thermocouple. Same animal and same effect, a moment ago bigger.
Some appliances like you are referring to use them to operate the controls on the oven, and they operate on millivolts. A standard thermocouple produces approximately 20 milivolts while a thermal generator produces in the 750 milivolt extent. Only difference is going to be the price which I believe will still be in the 50 dollar inventory to purchase it your self.
Good luck
Did you buy it at Lowes? Mine come from Lowes and is involved in the lawsuit. I made my claim and get my repair parts in markedly little time.
Before you do anything else, go to the below mentioned site and see if your component is invoved in the class dealing suit.
If indeed you are, then you are entitled to a small amount of reimbursement for monies compensated for repairs or replacement of this unit.
They will also distribute you the upgraded burner door and thermoswitch assembly. You CANNOT simply replace the thermocouple, as it is left appendage threads and Whirlpool was forced to discontinue this item.
You can efficiently identify whether yours already has the resettable thermal switch. Remove the blue inspection cover from over the burner door. There will be two wires that emerge from the door and bump into on a small white reset button.
To make a claim for settlement benefits, you must dispatch in a completed Claim Form, postmarked no latter than June 28, 2008.
The Settlement resolves a class action lawsuit against the Whirlpool Corporation. The lawsuit alleged that ¡°Flame Lock¡± and ¡°Flame Guard¡± marine heaters made and sold by Whirlpool, Lowe¡¯s HIW, American Water Heater Company, or the A.O. Smith Corporation, equipped with single-use thermocouples, and sold from 2000 through 2006, are defective surrounded by that their thermocouples are prone to premature activation. The companies denied these allegations but agreed to settle this case to avoid further expense.
Class Members include adjectives persons contained by the United States of America, its territories, and the District of Columbia who are productive purchasers of a ¡°Flame Lock¡± or ¡°Flame Guard¡± water kiln manufactured by American Water Heater Company, equipped with a single-use thermocouple, and purchased during the length from 2000 through 2006 (¡°Water Heaters¡±).
Excluded from the class are all people who have previously executed and deliver to one of the Settling Defendants a release of their claims arising form an alleged failure of the thermocouple contained by a Water Heater.
Answers: The pilot thermocouple may be the problem. It is easy to replace and pretty cheap. I would try that first. Directions come on the box but it is pretty much unscrew the thermocouple from the gas valve their will not be a gas overflow this is an electrical part. Yank out the sensing bulb from the pilot assembly. It is spring loaded. The means of access these dudes work is as long as a pilot light hits the tip of this thermocouples copper/nickle sensing bulb a tiny bit of electrical current is produced which holds a magnet within allowing the gas to come out and light the heating system. If that pilot flame goes out later the heater will shut down. These thermocouples wear out approaching anything else. Remove your old one and lug it along with you to the hardware store so it can be compared to a unknown one in length and so on.
I agree with the above. Go and replace the thermocouple. I purchased one from Home depot for below $10 when I replaced my two years ago.