I own a RUUD Achiever 9 and have the motor and capacitor replaced and the aficionado still shuts stale after 1 min?

---

Answers:    it is a ruud outside yeah,,,,yes

did you put same place the wiring
check this:

240 v is the power coming from power to the contactor and
are 2 wire doing 240 v very soon you will name to these: L1+ L2= 240v

now your admirer will have 3 wire + ground:
L1 going to red or black near red wire in the follower
L1 also will be in the C of the capacitor and from letter F contained by the capacitor to the yellow or brown wire surrounded by the fan

L2 going to black wire ,simply black ,black in the fan

ground is green color and going to the ground of your follower
if you are shure did like this wiring your lover will be right

ps. check if 240v is coming in the fan

---

check the setting on your remote if both devotee and compressor off in 1minute if you conversation about evaporator fan your mother board gone devolution it

---