I am looking to replace my breaker box. I want to know what is the best one for me to purchase? My house is 55 years old. The breaker box is probably...
My house is 55 years old. The breaker box is probably freshly as old. I am have problems with my dryer and very soon my breaker box will not even let me turn on the breaker switch for my dryer; as a consequence, i am looking to purchase a new breaker box. Unfortunately i know zilch about what brand christen i need and how lots volts and amp i need so any warning on this subject matter would be caring!
Answers: From the wording in your ask, I would suppose that this is not a task you should transport on yourself.
I prefer Square D boxes. I hate GE boxes and I dont similar to the "homeline" type that is adjectives in the big box stores as economically as real Square D.
Remember when you buy, you still enjoy to buy all of your circuit breakers.
Make a account of the existing circuits that you have, their amperage, 110/220 etc.
You want your unmarked box to have room for adjectives expansion. You will be connecting existing circuits right back to breakers of alike rating as in the antediluvian panel. Provided they were dont correctly contained by the first place.
Probably the minimum you would want is a 200 amp panel, they are available with a range of number of circuits.
If you are going up in amperage on your Main breaker, be faultless that the entrance cable coming in from the meter can bar the max current of your new panel.
Probably at the meter, you will enjoy to pull the meter pave the way to kill the nurture coming in. This should be done by a definite licensed electrician. If you dont know what you are doing here, you will end up as a pile of charcoal subsequent to your meter.
I have done these, because my friend who is a concrete electrician showed me how. But this should probably not be done by the do it your selfer.
With the box installed and connected to the entrance cable by a professional, then the prime in the box can be turned sour and most DIY types can reconnect their circuits. Not much savings here if you enjoy ever seen a competent electrician do this, as they are massively fast.
When removing your individual circuits, use Brady chain marks or cassette and mark what they are and what amperage breaker they be in motion to.
For what it's worth, but you should still probably hire this out.
I imagine that your town requires a certification to put in a untried breaker box. Since you obviouslt don't know what you're dealing with here, I suggest you contact a few electrical contractors and go and get bids. Pick the best price and make sure he/she help you submit the required paperwork to the town. Be careful roughly speaking the house wiring, since it may not be capable of handle the greater current of your dryer.