How to reset the code for amana selection model # AGR5735QDB?
Answers: Your question make me question why you ask.
First, I dislike giving exact information when I have no model why it is being asked or why you want to know. I guess you must enjoy some problem you think it might fix.
Second, they trademark getting in to the programing mode difficult because they do not want those fooling with it and surrounded by the past Amana have used some boards that are VERY programmable and a person can foul other things up.
Third, I enjoy never seen an appliance that needed me to re-input the model code for the board except when replacing the board beside a new one. The information to do it come with the board. They do not forget even if they lose power.
And final, if you don't know that there is a tech sheet unnoticed in the inventory someplace with a schematic and sometimes that programing information is on it conceivably you shouldn't be fooling with it?
I am not trying to be critical but I don't want to detail you something that might make things worse. As contained by "First do no harm"? (appliance "doctor's" hypocratic oath? LOLOL)
It often involves holding two buttons down simultaneously. OR Amana like to use a hidden button for that. You pressed the star close to Amana logo (nothing indicates that is a button) for 5 second or until you hear 3 beeps confirming you are contained by programming mode and then the first entity shown is the model code which you confirm or change.
But don't try it short instructions on all the steps because you own different buttons that make the change, like the temp up and down buttons, and others that credit to the next programing mode. And you must construct sure you exit the programing mode before somebody tries to use it and pushes buttons shifting the programing.
Are you sure you want to do this?
If so, with a span that has a bottom drawer, remove the drawer and see if the tech info packet is tape against the wall there. Leave the envelope but remove the tech sheet. It can be masked elsewhere but that is most adjectives and please please put it back because I will involve it when you call me because the model code wasn't the problem. (wink)
Good Luck.