How to put grease and operate 14" Craftman Chain Saw? ...

Microwave ovens have any insulation between the inner...
Answers:    If it is a 2 cycle engine you need to find what the grease to gas mixture is. Then get a bottle of 2 cycle engine grease and follow directions to get the proper mix. If you can not find the grease to gas mix I would mix 40 to 1. Normally you will have to turn the on-off switch on. Close the choke, verbs and lock or hold back the throttle trigger, verbs the starter handle until you seize a rumble from engine, move choke to half bearing pull touch again until it starts let run for in the region of a minute at half choke next go to overt choke position and run. I forgot to mention there is an grease reservoir for the chain grease you need manacle oil (which sell by the gallon) and fill reservoir.