How to flex a light post contained by your front courtyard? I have a oil lamp post in my front patio. Which...
I have a oil lamp post in my front patio. Which was already prewired next to a sensor to go on at darkness and off by year. The sensor went bleak and stayed on all the time. I bought a current sensor (but different than previous one) that you just screw into the street lamp socket instead of wiring. First darkness and its not working? I bypassed the weak sensor wires by removing the old sensor. The wires coming out from the ground are white, black and copper. The wires coming from the Light itself are also white black and copper. I connected the wires by color, tap and covered them. Light turns on at night but is VERY Dim..just tell its ON and it nice of flickers?Tried new bulb..same effect?? What did I do wrong..Any Suggestions?
Answers: First, appropriate the new photo sensor out and screw the bulb directly into the socket. Does it come on full brightness? Probably so as it sounds approaching you wired it correctly. The new photo sensor is detecting the street light bulb instead of the ambient light due to the chalice in the fixture or it is pointed incorrectly. You probably want to attain a replacement photosensor like be installed in the post, or in recent times turn it on each dark when you want to use it.
Depending on the glass/diffuser. The light bulb is turning rotten the photo control. Buy a new post cell. Cheap, three wires to connect. And trade name sure it points to the North.