How do I bring back remove a bolt-thingy that I hold burred? I have a daylight bed that comes apart using an Alan...

I have a daylight bed that comes apart using an Alan key but I enjoy burred one of the holes in the top of the bolt (was turning it the wrong road and tightened instead of loosened). Is there some means of access of getting this last bolt out? Please help out!!
There's no hose down coming from any of...
Answers:    A good set of vice grips should know how to clamp on the head of the screw to bring it started. If you can't do that, drill it out. Start with a smaller bit, next enlarge it a bit. You singular have to drill down to the bottom of the screw commander. Eventually you will get the screw cranium off and should know how to disassemble whatever you are working on. Then the vice grips will work on the rest of the screw.
How do I money the drive belt on...
You could use an "easy-out". Drill a small hole thru the center of the bolt organizer.The easy-out kinda looks like a gluey drill bit with reverse threads. As you turn it ccw it will bite deeper contained by to the buggered screw & lets you take a grip on the bolt.
What should I do going on for my...