Hole within wall...? My son had a temper tantrum and be rolling around on the...

My son had a temper tantrum and be rolling around on the ground and he kicked the wall..it is about 5 inches across. What items to i need to fix it? And how much will respectively item cost?
How perfect is the Payne Heat Pump?
My family had duplicate issue, except with the door-knob .You will need a putty axe, a small container of joint compound, a wall patch kit, and some paint to bring in it all blend in. The directions are on the can of unified compound. You can find all of this at Home Depot.
Rain and Paint?
dry wall
some primer and
something to glue the drywall
price vary

What is best textile and best method to...
umm i would puddy the wall 1st and consent to it dry. Then you need to make sure that nearby is enough puddy to keep the hole within the wall covered. After that you can repaint the puddy spot so there wont be any white blobs showing, but that is opitional , most race would paint the spot back. That is about the most simple solution to fixing a hole contained by a wall. All the items you can get a Lowes. I know the puddy doesnt cost to much maybe a $1 and some adapt. The paint depends on what size can you get and what kind of brand or color. I hope this help you out with fixing the hole in your wall!
Get answers from millions of physical inhabitants.?
I dont really know how to fix a hole contained by a wall but...

You can check youtube.. its better so you can see how they do it

instead of reading it here..

http://youtube.com/watch?v=E5R6OqqpHbQ

here i found a video of someone tutoring people how to fix a wall with a hole contained by it
Where do I find an inexpensive Architect/Expediter within...
Answers:    Home centers sell a wall repair kit which comes beside a piece of mesh, joint compound, and knives to spread the mud. It's a somewhat simple process. You cut the mesh larger than the hole by about 2" on each side and fit tightly to the wall. Then you will apply 3 coats of joint compound, each coat spreading further out. sand the edges to spine them to the existing wall, spray some matching texture if desired, prime, and paint. Altogether, with the drying time between the coats of mud, it's in the region of a 3-4 day process. Hope this helps.