Help. Hot Tub press? I am replacing the pump motor. I removed the pump motor...
I am replacing the pump motor. I removed the pump motor and when I disconnected the plug in to the circuit board (like an idiot) I didn't wage attention to which one of the three plug-in spots it plugged into. Now that I received the new motor within the mail, I'm afraid to plug it into the wrong spot on the circuit board. Can anyone minister to?
Answers: Take a look at the plug ins and see if you can tell which one is the cleanest. If it's a 3 motor gifted set up, it shouldn't matter which board runs the single motor. If you are still contained by doubt, call the businesswoman.
Well if your motor is 115v and you plut it into a four wire 240v you may lose that motor. IF you told me what brand of hot tub spa pack you own and even post a link to a photo it can slickly be determined. If it's a 240v and you plug it into the wrong one then it's no big contract. Just make sure you turn the breaker past its sell-by date each time formerly you remove or insert the plug, otherwise you will burn up the plug.