Having Trouble Putting The Front Panel Back Onto My Dryer.? Okay, I went into my dryer today to replace the belt....
Okay,
I went into my dryer today to replace the belt. Once inside I saw that the belt be not broken but had jump off the pulley because of the extremely filling article my daughter placed in the dryer.
I put it rear legs together and replaced everything but now at the bottom of the front panel of my dryer it is extremely loose. I have tried to go back over it several times put can't get the front panel at the bottom of my Whirlpool dryer put a bet on tight like it be.
Can anyone help me?
Answers: near are two black clips on the bottom lip of the cabinet that the front panel bottom slots go over, next open door and raise up on inside of drum in establish to seat panel final to cabinet then reinstall the two 5/16th screw. If real hot model , then the cabinet have two hook tabs on not here and right edges which you have to slide the front panel down over, next follow my instructions from then amenable door.
when you put it on hold it out a ways..tip the top in & procure the little clips in the right place..(push up & in)..it should turn in place..hold the bottom contained by & fasten the screw at the bottom. You should have it.