Fix my pasture tractor? OK My tractor was working great, I get on it and turn...
OK My tractor was working great, I get on it and turn the ignition nil no noise no click dead. I go underwater start it runs fine sounds good.I let up on break and tractor requirements to shut down. What is happening?
The battery is late because your magneto is not charging it while it is running. You need to replace the battery and magneto assembly. That's the mobile you need a new one
You have a safekeeping that is not working or the wires or connector to it are loose or broken.
It won't agree to you start it if it thinks the blade is engaged or that you are not on the form. I think you don't have to be on the form if the brake/clutch is engaged that is another switch.
If it cuts sour when you let up on the brake, then my guess is explicitly most likely the seat safekeeping switch or the clutch switch itself. The wiring on mine is a little exposed and they can bring back pulled loose if I run in to some brush. lol.
Good Luck.
Answers: Happened to ours aswell, turns out it was the safekeeping clutch underneath the seat, we just needed to wave to and fro the wires around a little and it worked again also you may want to check your battery because the safekeeping clutch only allows the tractor to turn off if the brake is rotten or if the blade is turning, but it does not stop you from starting your tractor, check both out. Hope it helps.
requirement new battery