Door instillation problem, door will not come together at top when closed will not trademark properly, even though rank.? Have checked for leveling,and shimed.do not know what can be done to...

Have checked for leveling,and shimed.do not know what can be done to correct problem.

---

Answers:    need further description to help; what you be set to by door will not meet at top. if the lock side of the door is higher or lower than the commander jamb, then it is out of square. if the bottom of the door closes, and the top will not, then it is out of plumb, or the door is abnormal. the frame has to be level at go before, legs and side of jamb legs.
---
sounds like at least the door is sick. place a 6' level or long straight board along the room side near the snake. board should lay flat and be level vertically. if it's bowed, it can't be fixed. you can sand or plane the lock edge to back the sticking. or replace one of the center hinge screws into the jamb with a 3" screw and try to verbs the jamb closer to the studs(further from the lock jamb)
Hope that helps.

---

Sounds like the door conserve isn't square. If I understand you correctly, on the side where it is the biggest perforation, shim the opposite jam...so heaps variable..I will need more details in the order of what's going on. I agree with Ron and he has a virtuous link also.

---