Did I ruin my ceiling enthusiast? I replaced the switches for the fan, the fan turned worked (blades...

I replaced the switches for the fan, the fan turned worked (blades moved). I replaced the admirer light switch and now nil works. I think I have the correct electrics now for the lights but still nothing works.

Is it average if the light is wired incorrect then the adjectives thing won't work or should the blades still move
but there will be no muted?
My hot tub oven wont work. And i...
Answers:    first i must ask why you changed the switches? I'm assuming there was a problem to start with i"m going to suggest you take the entire assembly down(again) and recheck adjectives your connections ,there must be a missed or improper or only a loose connection then check your breaker box to build sure all is sound too ! okay presently after reading your other question i see your talking give or take a few the wall switches (not the actual ones on the fan) go to this old houses' website for the correct installation of a 3-way! well brought-up luck
Why does my ceiling street lamp turn stale...
Anything can happen including setting fire to the switch. You do not have the correct electrical system. Unless you can compare it to a fan light switch surrounded by another room you must call an electrician.

Draw a wiring diagram of the switches, lover motor and light. Include the correct colour wires in your diagram. Use the proper electrical symbols. If you can do this, conceivably someone can tell you what is wrong