Did i mess up my cord? ok, so i bought a dryer cord today because my oldish dryer...

ok, so i bought a dryer cord today because my oldish dryer had the wrong cord. and so when i got it home i required to check and make sure it would fit with the wall plugin. ably, like an idiot, i decided to plug it surrounded by, BEFORE attaching the plug to the dryer. the part that wasnt attached to the dryer was on the floor, (lucky for me) and poof! white/blue night light, and black mark on my floor. the little prongs on the end of cord that attach on the dryer are black of corse where on earth it fried. i guess i tripped the breaker because it wasnt on. my husband, after nearly having a stroke, attached the cord to the dryer, THEN plugged it in.nil. thats when i noticed the breaker wasnt on, i flipped it back on, we tried the dryer again, nought.
could i have messed up the cord? the plug? burnt the breaker?
What is an eight penny staple?
looks like no
Whenever the hot hose faucets are turned on...
you cannot play with electricity resembling that. You have to be so care ful. It is possible that you prejudice the cord but I doubt it.
Did it get wired up right? Get it checked

My dishwasher seem to be rinsing the dishes...
Before you try this, travel back to the breaker, turn it all the means of access off. then turn it subsidise on. Breakers must be reset this way

This could have burned the cord inside the insulation. With it unplugged, split the telecommunication back from the ends that connect to the dryer. If you find no burned wires, try pulling on each line (one at a time) if any come out of the outer sheathing just get a unmarked cord.
Damp patch? Whats the cure?
Answers:    Not potential. You are one lucky, living, lady. The breaker blew because it did its job. Even while charred the metal round terminal on the cord would make contact. Tell your husband to take the cord past its sell-by date (unplugging it of course) and clean the terminals. Enjoy your dry clothes.