Can you revise sink surrounded by the bathroom short adjectives a copper pipes? ...
Answers: You may find an isolation valve on respectively pipe leading to hot and cold. The screw pave the way should be in the (I) position. Turn these to the (-) position and turn the tap on . . . the wet flow from the taps should stop. If the clean sink doesn't fit exactly, then you can cut the pipes above the isolation tap without alarm of water leak, although there will be for a moment loss as there will be some wet remaining in the pipes. You can buy flexihose as the above answers suggest and next fit to taps and cut pipe feed. Quite easy but check that you know how to fit joint properly before trying out for tangible. You always own the back up of the isolation valve, so don't worry. If no isolation valve and you don't know how to turn off the river feed, after consult a plumber.
As long as the new component going in is exactly one and the same size and pipe fitting specifications as the old one