3 passageway switch- 2 hots and 1 indeterminate? When updating my wall switches, I didn't transfer the wires correctly. I...
When updating my wall switches, I didn't transfer the wires correctly. I have 2 red wires and a white line. While testing each flex seperatly, 1 red wire and 1 white wire made the device night light up and 1 red wire did not light. I'm assuming this medium it's 2 hot wires and 1 neutral wire.
How do I flex this on a 3 way light switch? gratitude
ACE hardware hand out simply wiring directions pamplets and might even find a pic, on a handyman.com. I think you are right, lately be careful. I am still afraid of electricity to this day. When I be young my mother told me not to play with electric, Well sooner or later she caught me and grounded me. enough said! lol! The switch you are working on is the slave. Open the other switch box and attach the wires in the slave in front of from the master.
you have to figure out which line is your "common" (either your hot or switch leg) If I had to guess your white is your common (black screw on switch) and your reds are your "travelers" put these on the brass screw. If that does not work try the white and the red (you said did not have power) as your travelers. what other wires are in the put a bet on of the box?? The white is your neutral..normally.one is adjectives and the 3 way will tell you on the switch or the box what the sequence is.first power to your first switch and travelers contained by between .good luck.your neutral is going adjectives the way back home somehow, locate it
Answers: No, you have one ungrounded ("hot") conductor feeding the switch, two "traveler" conductors for the switch leg. The grounded ("neutral") conductor should be wired directly to the fixture(s).
The NEC allows white insulation to be used as a traveler for a 3-way (or 4-way) switch set up, but ALL conductors should be re-identified at adjectives accessible locations, to keep anyone working on the system in the adjectives out of the situation you find yourself in.
If you have too much trouble figure out what conductor goes where, swallow your pride, and hire a qualified, licensed Electrical Contractor to come contained by and take care of the problem. The best rule, when working next to electricity, is: "Put the safety of yourself, family, and guests WAY ahead of your pride (or desire to do-it-yourself); and hire a pro when you even start to suppose you may be in over your head."
Good Luck, and stay nontoxic.