What would be a apposite bearing to produce a drastically rusty handlebar look better,I own sand it dutiful.? After sanding it still looks pretty dull,It's a 30 yr. old-fashioned...

After sanding it still looks pretty dull,It's a 30 yr. old-fashioned trike I'm fixing up for my Grandson,It was his Mothers.

---

use 2 coats of Rustolium spray paint.

---

Go attain it sand blasted and then buffer polish it next to the finest grit you can find.

If you don't need the metal look, a short time ago buffer polish it with a 600 metal grit disk and put 2 coats of metal primer (car body primer) and consequently 2 shots of spray paint with a final coat of clear polyurethane spray varnish.

---

Answers:    Use WD40 or other grease to keep it from rusting more.
Have you tried LCR cleaner or Brillo pad, then if adjectives else
fails supply either the rubber handlebar coaters
for bigger bikes it should cover a trike adjectives the way or wrap
it beside the cute tape! Or even Electrical video.
Heat set tape is also a risk it is just set beside
a hot hair dryer it capture tight and stays put.
Good Luck.
P.S. Don't let babe eat or chew on it because or tetanus.

---