What is a mitre pooled? Why would I chose to use it if i be making a storage system i.e. hexagonal shaped? What is a mitre joint? Why would I chose to use...

What is a mitre joint? Why would I chose to use it if i be making a storage system that is hexagonal shaped..

My don told me to make hinge with mitre joint..

Now i have to pack out this form, and it says...

I hold chosen to use .. joints for . because ...

But I dont know what a mitre amalgamated is, why would i chose it? whats an advantage of using it? what is it ?

Thanks

(If im asking this quiz on the wrong forum, can somebody please direct me to the correct one?)
Toilet is aid up into the tub?
Answers:    A mitre joint is ordinarily made when the edges of the boards to be amalgamated are chamfered along their length, each at 45 degree, so that when assembled to form a right angle there is no unified line. It is extremely neat and as in that is a considerably large mate area relatively strong for most purposes when glued. When putting together a hexagon though, remember respectively of the joints is 60 degree so the chamfers actually want to be 30 deg on the edge of respectively board in your baggage. You can also fit piano hinges or the similar to instead of permanently attaching the joint, but the principle is the same.
How do I remove the writing from PVC...
A mitre reciprocated is a cut you make at an angle customarily 45 degrees but can be 30, 221/2 or any angle you have need of so that the wood appears to be one piece. If you used butt joints the work would look approaching 5hit. Any way If you don't really twig what it is you shouldn't be attempting to build anything hexagonal shaped
I hold a do it you self put...