To remove paint from an antique wooden table? I was told to rub down the whole entry with rubbing alcohol...
I was told to rub down the whole entry with rubbing alcohol and linseed oil, consequently use a propane torch on it to make the paint bubble up so it can be scraped off. I own rubbed on the alcohol. How long should I wait before using the propane?
Answers: This is a to some extent risky way to strip an antique. I have done a few pieces and I would suggest you use soy gel. It is industrial strength, stays where on earth you put it and the odor will not overwhelm you. Paint it on, let it work,. Once the coating is softened, remove it with a scraper or steel wool.
CLEAN UP: Clean the remaining filmy residue with water, using a scrub brush and/or mop or power washer. Allow surface to dry beforehand further preparations
Don't use the propane torch. Fire and wood don't mix. You'll probably end up putting burn spots on the wood. Go out and buy a paint removing solution and follow it's instructions. The paint will blister and become gooey. Then use a putty knife to cut off the old paint. The most prominent thing is once the paint is removed, the remnants of the paint remover must be thoroughly removed. Use denatured alcohol or paint thinner. Then let the table dry thoroughly, preferably outside next to some sun. Make sure you sand the table with fine grit sandpaper before applying the finish stain or paint.