Textured walls? Recently we removed the wallpaper from our kitchen and found paneling (the...
Recently we removed the wallpaper from our kitchen and found paneling (the type with the general gooves) that had be filled near drywall mud. Not a pretty site to find. We tried painting over the paneling beside textured (sand) paint. We are not satisfied next to the results. I am now thinking almost adding more drywall mud to the smoothout the grooves and consequently trying another wall texture - similiar to the one in this join:
http://www.bobvila.com/HowTo_Library/Cre...
Will this work on paneling? How hard is it to create this look? Is this a spray-on look or something that have to be created by hand? What are a few of the best textured wall products available? Any other suggestions on resources welcome. Lastly, will I need to sand down the lately latex sand painted wall before applying a alien wall textured?
Answers: The picture from the link (the close-up of a textured wall) be most likely done by hand-- any by a trowel, a sponge with a cut-out cut into it or by a patterned roller cover. The picture provided on the website looks great, but you must hold in mind that the finish be created by a professional... it may look simple, but I assure you that recreating textured effects on a large extent can be quite difficult. It's also honestly time-consuming and can be exhausting work.
If you've never worked with plaster or plaster-like medium before, I importantly suggest for you to make a few "sample" or trial boards before jump right into this project-- find a few scrap pieces of a surface similar to the one you intend to work on and use these (you can any purchase a small sheet from somewhere like Home Depot, or possibly stop by a home or business in your neighborhood where on earth work is being done and ask if they've get any scrap pieces they could quantity with).
When it comes time to actually resurface your wall, try to work within a series of small sections while keeping your edges that you're tallying to wet and workable. Don't over-work a bit; take frequent breaks to step final for a moment and judge the wall contained by it's entirety, making sure each fragment is flowing into the next seamlessly.
I don't own a product from personal experience that I can recommend to you to achieve the exact finish from the photo on the website relation, but I can recommend a product that may work for you in a similar approach. Behr makes a product call "Venetian Plaster" that is applied by appendage (trowel)-- I believe it costs around $50.00 a gallon. (It's pretty heavy stuff, so be prepared for sore biceps the subsequent morning.) If you go to behr.com, I'm sure they would enjoy a product write-up on their website for you. It's not too difficult to use and kind of fun to work next to.
Will this work on paneling? As long as the paneling is securely surrounded by place beforehand and as long as your current surface is a surface that is approved of and prepared to the specifications provided by the businesswoman of whichever product you will be applying. Manufacturer specifications should be listed on the product sticky label; if they're not provided on the product label, call round the manufacturer's website for additional information. At the extraordinarily least, you will call for to apply a primer/sealer to the surface before tallying anything else to the wall (I like to use Zinsser Bulls Eye 1-2-3).
The creature who provided the answer before mine have very right advice-- they suggested to simply remove the paneling from the wall and have it sheet rocked. I totally agree. Hanging sheet rock isn't extremely difficult, provided that you read nearly the process beforehand and have someone present you a hand beside either holding it contained by place or screwing it within. Mudding the seams can be a moment or two tricky, though (there's definitely an art to achieve a smooth surface in the end).
If limp sheet rock seems to be more of a errand than you'd want to get into, try asking some friends or neighbors to recommend a drywall company. Make sure to catch a couple of estimates before decide on one. You may be able to cut down on costs if you remove the current paneling beforehand, as capably as let the drywaller's know that you'll be priming and sculpture the surface after they've got it hung, mudded, and sand.
Good Luck!
Maybe you should just remove the panelling. You could put drywall up instead. It might be smaller number expensive and less time consuming when adjectives is said and done than layering upon layering things you are dissatisfied with.
It's not too tough to do drywall. And it's not dreadfully expensive. The hardest item is holding it as it can be heavy.
You can spray texture on a wall beside a machine that is to say air-pressure powered, or you can roll texture on, or they have texture within a spray can for smaller spaces.
I don't know if texture would stick directly to the panelling. One important article no matter what you do is to properly prime a surface first or "size" it. Otherwise, it can create a horrible situation.