Rewiring a waste disposal oblige? I had to replace my litter disposal and didn't look at...
I had to replace my litter disposal and didn't look at what wires came out of the out-of-date one. On the new disposal is a white and black as okay as green (ground) on the old plug the wires are adjectives black except one has grooves does that progress to the wite wire or the black one on the foreign disposal. I don't want to wire it worng and fry the unusual disposal.
Thanks
Answers: Most garbage disposals work stale a plug(120V, 20A). Was the original disposal not plugged into a wall outlet beneath the sink? Are there 3 of the "old" wires or in recent times 2? Is there a switch that operate the disposal? Sorry so many question, but it will be impossible for any one to tell you where on earth the wires go minus some color markings. 120 Volts is signified by wire color. black - 120V, white - Neutral, and green - ground. If this color classification was not followed for the incoming power it will own to be checked with a tester of some sort. If it is attached to a switch. and most are. after you may be able to look contained by the switch box and see how the wires are attached there. The 120V rope should be attached to the switch, the neutral should be spliced together next to a wire nut, and the ground should be a unclothed copper and also be spliced together with a lead nut. If there are no identify markings/colors in the switch box you will want a tester that reads voltage to be capable of find the power wire. If you stipulation help, discern free to email. Good Luck.
With the breaker off seperate the wires lower than your sink for the disposal.
Flip the breaker for the disposal.
Test the 2 wires to find out which one is getting power.
Flip the breaker back bad
Connect this wire to the positive or hot flex for your disposal, see the instructions for it.
Connect the other wire and the ground and youve get yourself a meat grinder.