Painting - frustration beside poorness? I'll let the photo do the discussion: http://img.photobucket.com/albums/v493/p... That's after...
I'll let the photo do the discussion: http://img.photobucket.com/albums/v493/p...
That's after a second coat. It looked much better before. Now, it's a patchy mess.
Beauti-Tone latex-based paint. The first coat have more than 24 hours of drying. The second coat has have about 3 hours to dry.
What would hold caused that? Crappy roller? The wall itself?
And more importantly: how can I fix it? I'm afraid to do a third lode since I didn't do a second layer on the other walls. I'm afraid that wall will look conspicuously 'fuller' in colour than the walls near only one coat of paint.
Help.
Answers: If you used Spackle to fix the holes when you use any
description of enamel you will get flat spots what you call for to do is
get some can primer bins or killz that will embezzle care of your
problem
It doesn't mater how tons coats of pant you put on it
it will do the same article
PS prime it with flat paint that will work
Anytime you patch the wall you hold to sand it smooth if the wall is smooth , and if the wall is textured you still have to sand it down so you don't hold ridges showing then you texture it to game the existing wall , then you must prime it if not it can three coats or more to hide the patch depending on the quality and concreteness of the paint , If what I saw in the picture is patch showing through then you solely have prime right over the integral wall and then paint over that unharmed wall.