Painting a bookshelf--paint is crumbling? I have a bookshelf explicitly one of those "put it together yourself"...
I have a bookshelf explicitly one of those "put it together yourself" things from Target. It is really just ply-wood next to a "sticker" on the surface that makes it look similar to wood. The problem is, I actually approaching the size of the bookshelf and can't find a decent replacement, so I want to paint the one I own.
My question is, how do I seize the paint to stick, and what kind of paint do I use? I tried it next to a flat indoor paint after lightly sand, and the paint literally just peel off the moment anything scatches it.
Any suggestions? Thanks!!!!
Answers: You necessitate to lightly sand the surface to bestow the primer something to stick to. A glossy surface merely won't allow paint to adhere in need a little assistance.
Get a package of 120 grit sandpaper. Lightly sand the surface. Buy a tack-cloth and rub over the just this minute sanded surface to pick up any boogers.
Buy a quart of Kilz stain snuff out and primer. I prefer oil base primer. Paint from the bottom up. Always use a "wet-edge" when painting. A wet-edge is when you touch your drizzling brush to the wet paint.
Let the surface dry completely ... don't basically "wish" it dry. Wait and wait some more.
Lightly sand again. Tack-cloth up the boogers.
With your desired paint color (again grease paint is better) and with a unknown brush start painting. Let dry, sand again, re-paint.
If adjectives that sounds like a spasm in the backside. You can always use a can of spray primer, skip the sand, then spray paint it the color you want.
It will chip, but it won't look really crappy for roughly speaking a year, and by that time the shelf might be falling apart any way.
Those shelves are made from sawdust, mixed up next to glue and pressed into sheets, next wrapped in Contact Paper and heated. It is disposable furniture, so I wouldn't plan on endorsement it on to your grandchildren.
use a oil basis paint it's durable