Is nearby an trouble-free road to get the drift how to cut crown molding? ...
"Measure twice, cut once." First rule of a tradesman. <};-})
Here's a apt video on that
http://www.askthebuilder.com/How_To_Cut_...
The trick is realizing whether the pooled will be on the inside or outside of a corner and to remember which edge is up. All that is to say covered.
Answers: There really is no easy opening. Too many selection and angles to chose from. I hate to give an account you,,,but there uncommonly is a 90 degree angle surrounded by a house. If you can afford it buy about a total of 6 foot (2 pieces 3' long) try cutting it @ a 33 point angle on the miter tilt (when you tilt the blade on the saw) and a 32.5 degree on the miter cut (the angle you cut moving the table angle) This is just if you are using a Compound miter saw. You will have to adjust the blade from in that weather to much of an angle or to little. If you are not using on or can not get a hold of one you will be better past its sell-by date using decorative inside and outside corners so you do not hold to cut angles at all.