Is it possible to enjoy a brass nameplate riveted to my forehead ?
unsurprisingly it is.if you really are serious then i read an article offshore in BIZARRE mag that deal with horns etc. being put onto the go before.it involved the insertion of grommets inserted under the skin and then after uplifting anything can be screwed into the socket,it is a 2008 publication so try and get a copy and read up on it Well I Imagine That It Would Hurt... ALOT!
But hey That Never Stopped People, I Mean Look At Some Of The Things Humanity Is Doing Today So Know What I Say Go For It It Cant Get Much Crazier Than Spliting Your Tongue In Half And Getting Tattooed Like A Snake With Scales :O]
Sure, I meditate 3/16 pop rivets would do it.
However before you start, infuse a bit of bupivocaine at each
Indicated drill location site (24 hour local anaesthetic) and try
To stop The drill of late as it goes through your cranium, so you
Fail to damage any small piece of remaining live brain tissue
On here. Pop the rivets and hey presto.. Might want to
Register into the hospital the next day as the spasm will hit
By the time the local wears off, and the different metals within the
Rivets will start electrolytic corrosion which will not be at
All pleasant for those few live cells.
In case you enjoy not got this fixed as a method, two alter-
Natives than riveting woud be to use titanium or stainless
Steel (surgical/orthopaedic grade) screws. I shoudl also try to stand the moniker plate off the skin so you or the warders can clean losing it. Make sure you keep the brass plate and the screws apart next to plastic bushes as again corrosion might be a problem with dissimilar metals if any serum runs down the screw tracts onto the screw plate junction.
o_0 why?!
Why not. People have pins through their tongues, nipples and belly buttons so you might start a trend. What are you going to cut on it - 'Front' ? That's ur priviledge...If u can stand the pain. Another option is use super paste and its non-painful. Until, if u want to remove it.
I knew a guy once who went to top-security prison for nailing a brass name plate to someones boss. depends how thick your head is
failing that you could try superglue :0)
It sounds as though your sticky enough to have it done short to much pain Won't help, you will not know how to read it so you still won't know who you are.
Answers: Yes it is. Just put it next to the di*k thats already there!
Too behind mate, your brains have already left. off-colour nail it on for you
Why don't you just write it with irretrievable marker, or get a tatoo of a brass nameplate :D anythings possible