How to repair the "flocked" top of a Coleman nouns bed? I have seen adjectives the answers to repair a hole it it...

I have seen adjectives the answers to repair a hole it it is on the "plastic' area of the bed, but I have a small hole on the 'fabric' side of the bed. Tried using duct cassette, but the bed deflated. So, any ideas as to what type of tape to use that will hold on the stuff and cover the hole? Thanks in advance-J
I've hear that near is something you can...
Answers:    I had this problem. I get a vinyl pool patch and used a thin coating of silicone caulk on it. While deflated, place a heavy purpose on the patched area to secure the patch. You want to leave it cure for a full day. Don't use too much silicone or it will drip out around the patch and also secure whatever you own holding it down.
Has anyone used solar inserts on a conservatory...
Here is what I would do...

Buy a patch kit for pools or rafts. Cut a large square 2 inch patch. Cut a 1 inch slit surrounded by the bed through the hole that is leaking. near the bed deflated and lying flat, fold the patch and insert it into the hole...smooth it flat and center over the hole. Try to get all the wrinkles out. Use a q-tip covered contained by the adhesive to get gum inside and on the top of the patch. Line everything up, place a piece of wax paper over any adhesive that comes to the surface. Make sure everything is wrinkle free and place a cargo over the wax paper and patched area so that it dries in need air bubbles or wrinkles that can cause leak. If you are careful and keep the sticky stuff inside and cut straight, you might end up with an invisible repair.

I never in truth used this method, but it should do the trick. I know that you can repair carpet in a similar process.
Good luck!