How to Make a Circuit? I have a bulb, bulb holder and 1 mobile holder and 1...

I have a bulb, bulb holder and 1 mobile holder and 1 wire. what i wanna know is how do I sign up the wires up? using tape?? and why is the bulb holder's flex in a loop? Do I own to cut it?
How do i use an aluminum brake to...
Answers:    A circuit is made by the wire departure the positive charge from your battery entering the bottom of your bulb and exciting the filament ( the little flex in the bulb ) cause it to glow, consequently continuing on to the negative side of the freestyle.

You will have to cut the lead loop on your socket ( bulb holder ) it is a loop because you might want to make one telecommunication longer than the other. Lay or draw out where you want everything to be ahead of time, past you cut. You will have to cut the other length of telecommunication as well.

So, appropriate the one piece of wire, strip away the plastic insulation and attach one end to the positive terminal, and use a plastic lead nut, or connector ( they come in different sizes ) to connect the other close to one wire of the the cut loop of your bulb socket. Twist the exposed wires together and use the wire nut to bonnet them. Take the other wire and connect it to the gloomy side of the battery and the other cessation to the socket wire using telecommunication nuts.

When you connect the last rope to the battery, your bulb will reading light up