How to kind a Greek Column? I'm having a toga party for my 21st and I considered necessary...
I'm having a toga party for my 21st and I considered necessary to make my own Greek columns (it would save me a ton of money!). Does anyone know the best tools to use to get one? And how to make it? Any help would be appreciated!
Answers: Here is how we did it for a set we desingned: Get PVC pipe at the home recovery center in the size (diameter) and height you desire. They come within long pieces that can be cut. Wrap that in chicken wire and apply a coat of plaster of paris or drywall compound to completely cover the chicken lead. Let it dry thoroughly. Put on another coat and this is the one in which you will make the indentations adjectives of the way around the column, so it has to be a bit thick. A plastic spoon works great but you have to keep hold of off loading the excess plaster or compound. Work in small areas applying the second coat and running the spoon down the plaster until you cover the entire column.
To construct the capitals, cut a round of wood to fit inside the PVC, one for both ends. Make 2 other rounds which are just a short time larger and protrude out around the column by an inch or two. Then cut a square base for them all to sit on. If you use plywood, use wood pack on the sides for a smooth appearance, let it dry, sand it and then prime and paint adjectives of your base pieces. Once they are dry, screw all three pieces for respectively end together (a little wood glue add stability). Then use a heavy duty glue, approaching Locktite, to secure the top round to the inside of the PVC pipe. If you make the columns, high-ceilinged, place a rock or sock full of sand on top of the bases until that time you glue them in for weightiness at the bottom and stability.