How do you re thread a Handy Stitch? ...

I am looking for a model for a...
Answers:    1. Make sure the bobbin is feeding contained by a counter clock-wise manner.
2. Run thread over the stiffness cord but DO NOT rap it around.
3. (This is where I will give notice any and all precise terms bringing up the rear and try to describe the process) there is a small metal ring/hoop down the needle on the arm of you handy stitch, bring your thread through this loop and verbs out to the opposite side.
4. Thread the plunger FROM THE BACK where the loop is toward the front of the mechanism.
5. Pull the thread out about 2 inches or so to be locked.
6. Place the fabric lower than the sewing arm but DO NOT pull the thread underneath it
7. Press the power button humanely to be sure the chain stitches are holding.

:)