How do u dangle up a fine art or artwork on a brick or concrete wall? I dont want to make unnecessary holes or try to tack hammer...

I dont want to make unnecessary holes or try to tack hammer a nail into brick whic could effect some crumbling and not secure the staple well, pleade push for
Will epoxy putty work?
they spawn masonry screws that they flog at home depot. you have to drill a pilot hole, but the screw come with the apropriate masonry bit

How do I weigh for wood replacement window?
You can find "brick" hangers at most hardware stores. They look close to really large "clips" that you put over a brick within the mix. It has a "hanger hook" on it. You position one or two, depending on the counterbalance, on bricks and then droop it.

No fuss no muss.

Hope that helps.
Why would our medium heat section work and...
Answers:    If you use a masonry drill bit, you can drill a small hole in any the brick or the morter between bricks. Then, use an expansion type screw, but it needs to be one next to a plastic sleeve you drive in next put the corresponding screw into the plastic, leaving a bit out for your hang down wire. When removing, you can find a approach to patch the hole. If in the brick, spread with wood putty and put a mop of matching paint on it and consequently scruff it up a bit. If morter, simply mix a small batch and patch if you remove the screw. The sleeve stays contained by.