How do i solder copper hose down pipe? ...
1. Clean the ends of the two copper pipes you are connecting near a brillo pad and/or a small bottle brush. They should come up shiny when done.
2. Apply fasten (flux) to the copper parts that are to be soldered.
3. Fix pieces together. Heat up the copper pipe slowly, with a small butane torch. Apply roast evenly. When the area to apply solder of late starts turning red, remove heat and apply solder.
4. The solder should flow evenly around the connecting points. You don't have need of a large amount of solder, remember..."Bigger the blob, doesn't miserable better the job."
kind sure there's no water within the pipes - at all
verbs both ends of pipe
add flux to joint
heat the amalgamated till solder flows
let cool and verbs off excess
done
Answers: answer 1 and 2 are great, but remember to heat the fitting merely, and the solder will be sucked into the fitting when it's hot enough, instead of in recent times melting onto the pipe.
Both 1 and 2 hold out valid methods, and equal.