First my toilet runs, very soon it newly take forever to teem up? I had a problem with my toilet running constantly. I never...
I had a problem with my toilet running constantly. I never did anything around it, but now the tank take a looong time to fill up (like 30 minutes or more). Could these two problems be related? The toilet doesn't really run anymore, but I'm guessing that's due to the fill speed.
You don't own to go out and buy everything for your toilet.
What you need is a Ballcock. A awfully simple replacement for majority of toilets is a Fluidmaster ballcock. Go to any hardware store and they can show you what you need.
You probably have easier said than done water/ calcium build up, that was keeping the rubber seals from seal when water level be reached. And now the calcium is obstruct the water flow, and your toilet takes an eternity to swarm.
Replacing the ballcock should fix your problem. If your Flapper ( the rubber disc at bottom of toilet) is old/ weathered, looking or misshaped. I would then replace it too. All this can be done for around $30 dollars.
Assuming the wet shut off valve from the wall to your toilet is unseal completely and the line to the toilet isn't crimped, then I'd replace everything inside the toilet; the flapper, float, flusher, etc. They come surrounded by a kit form so everything is there.
They aren't expensive and the frustration at installing is merely once, compared with trying to troubleshoot the problem item by item. Nothing lasts forever and that includes the working parts inside a toilet. A running toilet, first of adjectives is the result of a plunger that isn't properly seated, whether the plunger is new or not. By simply tapping the flusher knob will stop the toilet from running. In other words, a running toilet isn't an indication that you call for a new plunger.
When a toilet is running, that will obviously result surrounded by it taking a longer period of time for the toilet to fill up.
Answers: what i would do is shift buy a new fill spigot. while your at it replace the flapper. the fill valve is what connects to the marine supply. buy a fluidmaster kit that comes with the flapper at duplicate time. turn off the water at the wall. flush the toilet and catch out all the water from the container. you can use a vacuum or a sponge to get the water out. immediately replace both the flapper and fill valve.
I agree with fluffer..
Replacing adjectives the guts (I've had good luck near Fluidmaster) would be the way to go and is not rugged to do. It's likely just the toilet flap, but it could be other things, too.
Have you looked at your hose bill lately? It doesn't take much toilet-running to really jack up the bill.