Ceramic tile?? Can you put ceramic tile over the commercial position hard plastic vinyl...
Can you put ceramic tile over the commercial position hard plastic vinyl tile? It would be really complicated to break up off the floor. It is stuck on at hand really good.
Answers: Yes, as long as the sub floor of the VCT is gelatinous enough. Is it over wood or concrete?
If it is over concrete, afterwards all you hold to do is score the VCT near a razor wound, and apply regular thin-set. I would recommend the one with chemical addition, but it is not necessary. It will utter on the bag which sub floors are legitimate.
If it is over wood, the wood needs to be at lowest 3/4 of an inch thick outdoor position plywood. The best option would be to place cement board over the VCT formerly setting the tile. This may make your floor rise much higher than desired, however. Again, you can turn right over it, but you need to win the VCT.
In either grip, you have to bring in sure there are no loose vinyl tiles. If in attendance are, you must remove them, or else the clay tile might crack.
No. Unless you put concrete backer board over the vinyl first, next the tiles onto the backer board. The just problem with this is that you would be raise your floor by an inch or so, and could run into problems with door jambs, molding, transitions, etc.