An elctric guitar is coated within laqor spray right? to get tht shiny effect?
to get tht shiny effect?
Answers: The short answer is yes.
Nitro-cellulose lacquer has be in use on guitars since the 1920s. It is still considered very desirable surrounded by terms of quality of finish coating for protecting the wood, clarity and charm, it can be polished to a high gloss and it is comparatively flowing and economical to apply. It can also be repaired, if needed (chips, scratches).
Nowadays, there are many, various variations on lacquer, thanks to modern chemistry. There are also other finishes used, such as two-part resin coatings, poly-urethanes and other modified lacquers, especially on electric guitars, that build to a glutinous and very hard coating. These finishes would not be correct on acoustic instruments as they would deaden the nouns, but are pretty good for the electrics. The new, heavier finishes are harder to repair and they dance on so heavily that when they chip, it looks like a chunk has be bitten out of the guitar! Modern, resin-based finishes are harder to repair as you can't "melt" the new finish into the old one the instrument you can with nitro-cellulose lacquer.
If you're going to spray lacquer yourself, I highly recommend getting a spray gun and NOT using spray can lacquer. A clad spray gun will give excellent control over the finish coat you apply. Remember, spray many strong coats and be prepared to do some sanding with exceptionally fine (400 and 600 grit) wet-or-dry paper between coats to get the immaculately smooth, glossy finish.
Once you're done applying lacquer, you'll need to do a touch more sanding and then buff the finish next to some kind of polish to acheive that glassy smooth and horizontal gloss. There are lots of different choices out there, start beside Stewart MacDonald and then, if you're curious, go out penetrating for more information on lacquer finishing. But I highly recommend getting spray equipment and using nitro-cellulose lacquer for a guitar finish.
Some of them are, Gibson, Fender, Martin, Larrivee, many of the top brands use nitrocellulose lacquer. But in that are other finishes, poly based that have a lofty gloss but aren't as easy to apply.