Aga-rayburn pipe lay out for instaling heat? ...
Answers: all pipe configurations will be found within the installation manual.
All depends what species of burner you're using, the modern pressure jet burners can use a conventional fully pumped system, usually next to a 3 port valve to direct to a hot hose tank or radiators, the elder wick type oil fired or any of the solid fuel burners will inevitability a gravity fed system to a hot wet tank, this can recurrently go via radiators on the method back down to the boiler if you've plenty heat size, with this system no pump is used and the boiler is not at risk during a power cut when the fire is still lit, hope this help