2 black 2 white 2 green contained by the wall switch. Fan have remote. Need to hook to standard muted switch obligation give a hand?

How do you replace the heat component on...
Answers:    The black wires are the hot, the white the neutral, the green is the ground. It seems near the two black wires, you may have a continuous circuit to another fixture, (light or outlet), or hot coming in and one feed the fan. You need to determine which chain feeds the fan and which is the hot and connect the fixture nurture through the wall switch. The white and green wires should be left intact. If you are not sure about electrics, get a qualified electrician.
Carpet repair, I be vacuuming when it sucked...
If you are wanting to remove the remote, you need to unhook the heir which is in the box where hanger-on connects to ceiling box. Disconnect the receiver then tie the wires coming into the disciple box to the fan wires. You will have to tie the blue and black lead from fan together with the black rope coming into the box. Also if you have 2 of each lead in switch box, one is the power coming in and the other is the line going to fan.