OK, Paint Gurus, can you oblige near this? I want to paint this room to a more neutral color. ...
I want to paint this room to a more neutral color. How do I begin? Do I start near a primer.. is there anything out there that can aid me cover this color without having to paint 3 or 4 coats? Any relieve?
Thanks!
http://i351.photobucket.com/albums/q480/...
yes you will need a primer...i recommend Kilz..you can find it at any HD or LWES...and one gallon should work satisfactory to cover most of it...and unfortuneately you will need to have 2 coats if you use the primer...if no primer you will inevitability 3 coats...some paints have primer in them.
FYI.buy a talent paint...cheap paint=cheap results
I'm guessing you want a much lighter color than that blue, and the bleak news is that you will need several coats to cover that correctly.
When you move about to the paint store, make sure you get a end that was made for light colors. Paint starts as a basis, and then they add gelatinous dyes to add color. If the color you want is dark, they will meeting it with a thin platform so it won't get too thick, if the color is fluffy, they will pair it with a tacky base so the paint isn't too thin.
The pious news is that you shouldn't need to prime it. Paint tend to go on paint really well.
In a best defence scenario, you'll need 2 coats to cover it correctly. I would guess that you'll need more than that, probably 3 coats.
Answers: Talk to the folks at a home improvement store, but if it were me, I'd read out two coats of heavy primer (or one coat if there's one on the market made for covering dimness colors) and then 1-2 coats of your new color.
I'd also recommend "spot testing" past you paint the whole room twice. If you find a dark-color primer, test it on a spot, next cover it with the new color and see if you can acquire away with only a single coat.
But primer IS essential.
Primer is for bare surfaces or some specialist primers are for problem surfaces e.g. unstable. You do not use a primer to obliterate a difficult colour. It will not breed any difference and is just an added expense.
Buy good feature paint, like Dulux. These have more pigment within them. Use Dulux trade if you want to use a more concentrated version. If you had lots to cover you could put a coat of wan grey first and then follow with the impartial colours of your choice.
Quite honestly, just use good paint and achieve stuck in to do three or more coats.
Yes, you conspicuously will want to start applying a primer, since it is a dark color. Get a high ability primer and hopefully that will cut down on the number of coats of paint you will need to apply. Your room will look totally different when you lighten it beside a neutral color. Good choice and I know it will look great when you have finished the project. It may come across a little overwhelming at first, but once you get going and see the results, you will be merry! Get it done with ONLY TWO COATS total:
Interestingly, reds and really bright colors like bright pallid are the hardest colors to cover. Darker colors like the dark blue that you own aren't as hard to hide even though intuitively it seem like they would be.
With a good tacky quality paint you could probably succeed with doing freshly two coats of paint of the color you want.
But to be safe, you can prime it first. Take note of this: primers can be tinted. This isn't other common knowledge, and even inhabitants working at paint counters often won't mention it or offer it as a cooperative suggestion.
Get a primer tinted close to the color that you're going to paint the wall. If it's not the exact color, that's okay--it'll hide the blue, and then beside a high quality paint you should know how to achieve full coverage with one coat of paint, have primed it with a color close to the color of your paint.
When you go to the store, explain to them that you want to achieve some primer tinted. If the person at the paint counter is unsure about that, a moment ago ask them if they can get someone else to come help too. It can be done, and it within no way changes the ability or function of the primer.
A few of the top rated paints, according to Consumer Reports are Kilz (sold at Walmart, ranks #1), Behr (Home Depot) and Valspar (Lowe's and many other hardware stores). A lot of the really expensive paints, such as Sherwin Williams or Benjamin Moore rank mediocre. The bottom two spots on Consumer Reports chart went to Sherwin Williams paint. You don't need to spend more than $25 per gallon for the best interior paint out here.
Looks like you're going to have to do some spackling, so I'd stir with a primer tinted to close to the colour you plan to use. Chances are very devout that you'll need two coats of colour after the primer no matter what you do, but it's worth trying for one coat. Use accurate quality primer and paint. I would suggest buying a tin of cheap white emulsion and undercoating your walls with that. later your top coat will be a lot easier. There is no need to use a primer as this is mostly used to seal new wood beforehand undercoating.