I am going to paint my entire home to get rid of it. We are moving everything out first. Sprayer or roller? Also, any sprayer recommendations (If explicitly the best way to do this)?...
Also, any sprayer recommendations (If explicitly the best way to do this)? We have painted some of the rooms darker colors so we will hold to use primer first. Any tips on the quickest and least expensive process to get this done would be greatly appreciated!! Thanks!
Answers: After empty the house, put down drop clothes to protect all flooring you plan on keeping. Remove outlet and switchplate covers and video over the outlets so you won't get panit on them. Dust rotten the cornice and base boards, adjectives of the doors and windows and any other horizontal or semi-horizontal areas where on earth dust accumulates. Wash and degrease any sleek surfaces with a mixture of TSP and HOT HOT wet. Rinse well beside a clean handkerchief and HOT water. Caulk any crackes and spackle adjectives holes.
Home Depot sells a really good brand of paint, call Bher, but Glidden will work well and they hold a color called Manilla Tan that looks great on the walls. Use Ultra Hide Semi-Gloss White for the trim paint (base board, cornice, doors, etc.)
Paint the ceiling first, two coats is best. First coat paint one direction. Second coat paint crosswise from the first. You don't have to verbs about cut contained by on the ceiling, just run the roller from turn-up to edge, making sure you bring back excellent coverage.
Cut in the walls using a 2" angled sash brush or buy those little shortcuts pad that have roller tips on them to slide along the ceiling. I've used them and they work great and fashion the cut in work shift 3x faster.
On the walls where the paint is threatening, prime them with Kilz Latex Primer/Sealer, it can be tinted to the exotic paint color. Roll out the wall paint, not too thin and not too gummy. Even after using the primer, you will still need two coats.
Once you hold the ceiling and walls finished, paint out the trim, windows and doors. Keep a small bucket of verbs water and a small washrag beside you to wipe up mistakes right when the happen, that process you won't have to turn back to do any touch-up.
Keep your rollers and brushes wrapped up contained by wet dissertation towels and plastic wrap in the refrigerator overnight so they won't dry out. Whatever size bucket of paint you are using, 5 or 1 gallon, get underway all of them and using an extramural empty 5 gallon bucket, mix adjectives of your paint together. This will prevent any change within paint color when you switch out buckets mid-wall. If using a 5 gallon bucket, use the grid that hangs inside the bucket to dip and roll the roller brush on. If you are using a paint tray, use a gaping one and line it near a plastic bag for smooth clean-up.
Now, it's time to get fine art.
edit: I've have good luck near bher paint, but I agree on the white, that's why I suggested the ultra hide.
Use a roller. If you haven't used a sprayer earlier you'll probably end up next to runs of paint all over the walls. Also near a sprayer you have to spend so much time tape and masking everything else so that the over spray won't attain on it, that you won't really save any time. I'd also suggest using Behr paint. You can bring it at Home Depot and it's consistently rated the top paint by Consumer Reports. Whatever you do, don't use Glidden paint, I've tried several of their paints, and they've adjectives been horrible.