How do you paint a guitar? I have an aural that I would like to paint. I don't...
I have an aural that I would like to paint. I don't really know where on earth to start. I want to be as creative as possible, so I need lots of colors. The guitar is a midnight blue. I don't really want to budge through the hassle of taking off it's untested paint, so I am hoping that I can paint over it. I am kind of going for a psychedelic issue for the art. Though, I haven't got too much surrounded by mind yet.
What mode of paint should I use for this job? And what else can you garnish a guitar with? I've considered using stickers, but I don't know how that'll work out. What is the process when fine art a guitar? Any good links you may hold on how to paint a guitar will be much appreciated. Also, I need to know where on earth to buy the paint. I am trying to go as cheap as possible. Many gratitude.
Answers: well, i'm thinking right very soon that acrylic paint sounds best for your purpose. it might be good for you to use some fine steel wool to buff the paint/glaze somewhat first, just to relieve with the adhesion.
start by taking past its sell-by date the strings, and tape over anything you don't want paint on, similar to the beginning of the nouns, the pickguard, and the bridge. then you're set to paint.
okay, so near acrylic you can buy that at any Michaels (my personal choice) or other local art/craft supply. but usually the smaller the store, like beside family owned craft stores, the more expensive the supplies, believe it or not. so you might be better stale going with the larger tie up stores. I wouldn't buy paint online, because most of the time it's better to be able to see the tube size surrounded by hand, interested it, check out the exact color of the paint, all of that. acrylic is certainly pretty cheap as well, if you buy the right brand. you can attain 60mL of Galiria brand acrylic for like $4 a tube. 60mL sounds resembling a good amount for you to buy, since you want alot of different colors, so roughly speaking a 60mL tube of each color might do. also, build sure you buy like 2 tubes of white acrylic mixer, so you can put in that to your colors to get different shades, the white go quite swift. acrylic is also really good for bleeding and mixing into other colors, so you could paint something really cool approaching tie dye swirls or something. but with the acrylic, it take a bit to dry, so you have to agree to the one side sit for an hour or so(depending on how thick the paint) until that time you can turn it over. also, try to get resembling 3 or 4 coats of the acrylic on if possible, if single to discourage chipping of the paint.
and here's just a tip that will spawn the entire process entirely less prickly, if you're right handed, start drawing at the top left and work your agency down, top right if you're a lefty, that way your forearm isn't dragging through the paint the entire time, which is SO annoying.
and as for the stickers... resourcefully, you could do that, but they might not stick onto the paint without using some sort of industrial cement, which is an ENTIRELY different can of worms, so you're probably just better sour sticking to the painting.
also, if here are any details that you want to add onto the guitar (if the detail you want is white, buy a white acrylic pen), but they are too fine to paint or you just don't want to step through the hassle of using a microscopic paintbrush and hoping it doesn't smudge, use a micron pen. these pens are roughly my god, they are completely omnipotent. they're rainproof and available in different colors and sizes, roughly speaking $3 a piece, but completely worth the investment. if you're going to draw anything onto the acrylic with the micron, label sure the acrylic is dry first! if the pen hits wet acrylic, it's credible to stop working, which is $3 down the drain, though if that happens you can other go vertebrae to the store and tell them that you bought the pen and it didn't work and they should make available you a new one... also, skulk for the pen to dry for a second before you touch it at adjectives, because the micron on paint isn't quite as sturdy as the micron in black and white. but this will be fixed with the finishing step.
okay, the last and probably most central step, is to glaze the guitar. you can buy acrylic finish at any craft store as well, surrounded by either a paint-on tub or a spray can(which i prefer) and it's roughly speaking $10. it's worth the investment though, because you're likely to use it more than once, because it's obedient on everything. but if you don't want to buy it, ask around, people usually own a can of glaze within their garage. the best brand is Krylon, but you don't really need to be picky. polish is glaze. you requirement the glaze because it will hold on to everything gorgeous, shiny, waterproof, and most importantly it will discourage chipping of the paint when you blow it about. if you've ever used spray paint, same matter, but if not, hold the nozzle like 7 inches from the wood to avoid pooling of the paint, even/thin coats will do the trick. nearly 3-4 coats, and it dries fast, but start some windows and put out your candles because this stuff is potent as hell. nosebleeds galore.
after everything, this will probably be around $40, unless you find some gypsy who will supply you homemade paint for super cheap. but if you do art stuff regularly, it's worth the money, because you can keep the extra paint.
i've never painted a guitar, but i've painted a skateboard, and wood is wood, so hopefully that help you out.
good luck :)
ask a professional